 |
 |
 |
MANUFACTURERS OF RADIO CONTROLLED TURBINE HELICOPTERS |
||
MANUALS
| DRAWING # | DESCRIPTION | |
| ZEALOUS II & LONGRANGER ASSEMBLY INSTRUCTIONS |
||
 |
ZMF-A-001 | MAIN SHAFT BEARING ASSEMBLY |
 |
ZMF-A-002 | ELEVATOR COMPONENTS |
 |
ZMF-A-003 | CCPM BELLCRANK ASSEMBLY |
 |
ZMF-A-004 | RIGHT SIDE FRAME ASSEMBLY |
 |
ZMF-A-005 | LEFT SIDE FRAME ASSEMBLY |
 |
ZMF-A-006 | MAIN FRAME ASSEMBLY |
 |
ZMF-A-007 | MAIN GEAR ASSEMBLY |
 |
ZMF-A-008 | MAIN DRIVE SHAFT ASSEMBLY |
 |
ZMF-A-009 | GEARBOX ASSEMBLY |
 |
ZMF-A-010 | TURBINE & GEARBOX ASSEMBLY |
 |
ZMF-A-011 | MAIN GEAR INSTALLATION |
 |
ZMF-A-012 | GEARBOX & TURBINE INSTALLATION |
 |
ZCFC-3-001 | ZEALOUS CFC III ROTOR HEAD |
 |
ZCFC-A-001 | ZEALOUS CFC II ROTOR HEAD (superceded by CFC III) |
 |
ZCFC-A-002 | ZEALOUS CFC III ROTOR HEAD EXPLODED VIEW |
 |
ZCFC-A-003 | ZEALOUS CFC III ROTOR HEAD CYCLIC MULTIPLIER ASSEMBLY & SWASH PLATE ASSEMBLY |
 |
ZCFC-A-005 | PUSH RODS |
 |
ZPB PLUMBING | FUEL AND LUBE SUPPLY SET-UP |
 |
ZPB-A-000 | FUEL AND OIL TANKS LAY-OUT IN THE FRAME |
 |
ZPB-A-001 | FUEL TANK ASSEMBLY |
 |
ZPB-A-002 | LOWER FRAME ASSEMBLY |
 |
ZPB-A-003 | OIL TANK ASSEMBLY |
 |
ZPB-A-004 | SKIDS ASSEMBLY |
 |
ZPB-A-005 | LOWER FRAME AND SKIDS ASSEMBLY |
 |
ZPB-A-006 | LOWER FRAME GAS TRAY & LOWER FRAME BATTERY TRAY |
 |
ZPB-A-007 | LOWER FRAME TRAY ASSEMBLY |
 |
ZTB-A-001 | TAIL ROTOR DRIVE SHAFT ASSEMBLY |
 |
ZTB-A-002/3 | TAIL BOOM ASSEMBLY |
 |
ZPB-A-010 | MAIN FRAME COMPONENTS |
